Glass washing machine is a kind of machine and equipment for efficient and accurate cleaning of glass.
It cleans the dirt and grease on the glass surface through the high-speed rotating brushes and water flow, which effectively improves the working efficiency and ensures the cleanliness.
However, to realize these advantages, it needs the correct operation process.
Below, let’s take a specific understanding of the operation process of the glass washing machine.
1. Preparation
Before using the glass washing machine, you need to do some preparatory work.
Including cleaning the glass surface of large pieces of dirt and debris, as well as to confirm whether the power supply and voltage of the equipment is normal.
At the same time, you should also check and adjust the angle and height of the brushes in order to maximize the cleaning of the glass surface to avoid residue.
2. Pouring water
Next, you need to pour the detergent into the reservoir of the glass washer.
Then, pour a certain amount of water into the tank of the washing machine, ready to start cleaning the glass surface.
In this process, you need to pay attention to the concentration of detergent and the amount of water, so as not to over or under lead to poor cleaning results.
3.Starting the machine
When all the preparatory work is completed, you can turn on the glass washing machine.
Before starting, you also need to check whether the various parts of the washing machine is operating normally.
Especially pay attention to the brush and water flow is normal, in order to timely inspection and maintenance.
4. Start cleaning
When the glass washer is started, you can start cleaning.
In this process, you need to place the washing machine on the glass surface directly above.
Ensure that the washing machine brush can properly cover the glass surface, and maintain a certain pressure and speed.
At the same time, you also need to adjust the angle and position of the washing machine, in order to clean different parts of the glass surface.
5. Finish cleaning
When all glass surfaces are cleaned, the washing machine needs to be turned off, the brushes need to be recovered and the detergent and water in the reservoir need to be drained.
At the same time, you also need to clean and disinfect all parts of the washing machine in order to ensure the hygiene and quality of the equipment.
The above is about the operation process of the glass washing machine. Correctly recognizing and mastering these operating procedures is very crucial to improving work efficiency and ensuring cleaning quality. We hope that through the introduction of this article, we can make you more familiar with and understand this equipment, so as to better use and maintenance.
Reference
- Li Jianling ‘Precautions for using a glass washer’ [2015] Building Materials Development Orientation 1, 4
- Fan Yajun ‘Talk about the maintenance and care of the glass washing machine’ [2014] CNKI 1, 27
- Dong Jinxing ‘Research and design of electrical control system for glass washing machine’ [2012] NCUT 1, 20
- Song Xiulei ‘Dynamic analysis and structural improvement of glass washer mechanical structure’ [2012] NCUT 1，24