1. The reasons for glass edge Polisher overload
There are several reasons for the overload of glass edge Polisher:
- Running load is too large. Glass edge grinding machine needs to consume a lot of energy when working, if the running load is too large, it will cause the current to be wasted, resulting in overload phenomenon.
- Unstable power supply. Glass grinding machine needs a stable power supply to work properly, if the power supply is not stable, it will lead to abnormal current, which will cause the occurrence of overload phenomenon.
- Equipment failure. Equipment failure may also be one of the reasons for glass edge grinding machine overload, such as motor damage, wear and tear of transmission parts, etc. These failures will lead to abnormalities in the equipment, which will cause the emergence of overload phenomenon.
2. Glass edge Polisher overload treatment
There is a glass edge Polisher overload problem, we need to take the following measures in time:
- stop the machine to check. When the glass edge grinding machine overload phenomenon, should immediately stop the machine to check, remove the cause of the failure, to prevent further damage to the equipment.
- Reduce the running load. If the equipment running load is too large, you can consider reducing the load, or increase the power of the equipment to consume too much electricity.
- Stable power supply. The device needs a stable power supply to work properly, we need to make sure that the device is connected to a stable power supply to avoid overload caused by abnormal current.
- Replacement of faulty parts. If equipment failure is the cause of overload phenomenon, you need to replace the damaged parts in time to ensure the normal operation of the equipment.
- Regular maintenance. Regular maintenance of the glass grinding machine is also a key measure to prevent the occurrence of overload problems. In the process of use, it is necessary to keep the equipment clean, check the fastening of each part, and ensure that the equipment operates normally.
Le Jianbo ‘Dynamic analysis of CNC glass grinding machine.“Combined machine tools and automated machining technolog”’ [2015] CNKI 1, 8
Deng Bing ‘PLC-based intelligent glass double straight edge grinding machine control system research’ [2015] Hangzhou Dianzi University 1, 9
Zheng Xiaoli ‘Finite element analysis and optimization design of key components of vertical glass grinding machine’ [2013] NCUT 1, 6
3. Maintenance recommendations
Glass edge Polisher is a more complex mechanical equipment, in the use of the process need to pay attention to the following points of maintenance:
- Refueling lubrication. In the operation of the glass edge grinding machine, each part needs to be filled with the appropriate amount of lubricant to reduce wear and friction, and extend the service life of the equipment.
- Clean equipment. The equipment needs to be kept clean, especially for the cleaning and maintenance of each transmission part, which needs to be checked regularly.
- Check the cable line. The cable line of the glass grinding machine should be in good contact, and it needs to be kept clean and dry to avoid electrical failure.
- Pay attention to safety. Glass grinding machine operation needs to pay attention to safety, do not carry out maintenance in the equipment operation, to ensure the personal safety of the operator.
The above is about the glass edge Polisher overload treatment and maintenance recommendations, I hope to be able to help you users!